|
|||||||||
|
|||||||||
 |
 |
|
|
 |
 |
 |
 |
 |
 |
 |
Dissolved Oxygen Analyzer Aqualyzer® 9065
AQUALYZER® 9065 SERIES
AQUALYZER® 9065 SERIES
The New Luminescence Oxygen Analyzer 9065 utilizes new luminescent technology
for measuring dissolved oxygen in water at ppb levels. |
 |
||
   |
|||
| FEATURES | BENEFITS | |
| Wide range analysis: 0.10ppb – 2000ppb (other ranges available on request) | No sensor maintenance (no membrane, no electrolyte) | |
| No calibration for up to 2 years | Simple operation | |
| Extremely fast response time | Compact design | |
| No sample interference | ||
| Excellent results independent of sample flow rate | ||
| Use in liquid and gas applications | ||
| High temperature alarm | ||
| Multiple sensor configuration |
NO MAINTENANCE DO SENSOR |
|
| Performance | ||
 |
||
|
||
|
||
| Range | 0.10ppb – 2000ppb (other ranges available on request) | |
|
||
|
||
|
||
| Accuracy | ± +/- (1ppb + 2% of the measured value) |
|
|
||
|
||
|
||
|
||
| Response Time | t90 (90%) < 15 sec |
|
|
||
|
||
|
||
| Units | ppb, ppm, µg/L, mg/L, % O2, % a.s |
|
|
||
|
||
|
||
|
||
|
||
| Current Outputs | Two configurable 4-20mA current (analog) outputs |
|
|
||
|
||
|
||
| Digital Output | Communication interface using RS-232 and RS-485 | |
|
||
|
||
|
||
| Alarms | General Alarm, Temperature Alarm, Two Concentration Alarms |
|
|
||
|
||
|
||
| Response Time | 90%of a step change in 60 second | |
|
|
|
|
||
|
||
|
||
| Power | 90 – 240 VAC ~ 50 – 60 Hz, 25 W | |
|
||
|
||
|
||
| CE Certification (on request) | Meets low voltage and low electromagnetic compatibility directives | |
|
||
|
||
| Options | Profibus; multiple sensor configuration; certificate of measurement | |
| Operating Conditions | ||
|
||
|
||
|
||
|
||
| Sample Temperature | 23 – 113°F (-5 – 45°C) | |
|
||
|
||
|
||
| Ambient Temperature | 32 – 131°F (0 – 55°C) | |
|
||
|
||
|
||
| Pressure | Maximum of 145 psig (10 bar) | |
|
||
|
||
|
||
| Sample Connection | 1/4” (6 mm) Swagelok | |
|
||
|
||
|
||
| Sample Medium | Liquid or gas | |
|
||
|
||
|
||
| Sample Memory | Up to 500 measurements | |
|
||
|
||
|
||
| Mechanical | ||
|
||
|
||
|
||
| Construction | Transmitter – high strength ABS, IP65 (NEMA 4x) |
|
|
||
|
||
|
||
| Dimensions | Combined Analyzer: Height=25.75”(65.4 cm), Width=8”(20.3 cm), Depth=6.25”(15.9 cm) Separated Transmitter: Height=10.92”(27.74 cm), Width=7” (17.78 cm), Depth=7.63”(8.99 cm) Separated Wet Section: Height = 10.5” (26.7 cm), Width = 4.5” (11.4 cm), Depth = 3.5” (8.9 cm) |
|
|
||
|
||
|
||
| Mounting | Wall mount or Panel mount |
|
|
||
|
||
|
||
| Wiring | IP 65 Connections | |
|
||
|
||
|
||
| Distance | Up to 49ft (15 meters) on request |
|
|
||
|
||
|
||
| Finish | Corrosion resistant | |
